Flush Trim Router Bit with Carbide Inserts, 1/2" Shank x 1-1/6" Cutting Length, Up Ball Bearing and Lower Ball Bearing, Wood Trimming Template Pattern Milling Cutter Router Bit
Flush Trim Router Bit with Carbide Inserts, 1/2" Shank x 1-1/6" Cutting Length, Up Ball Bearing and Lower Ball Bearing, Wood Trimming Template Pattern Milling Cutter Router Bit
Couldn't load pickup availability
Share
Bit Specification
Shank Diameter: 12.7 mm ( 1/2 inch )
Cutting Diameter: 19 mm ( 3/4 inch )
Cutting Length: 30 mm ( 1-1/6 inch )
Overall Length: 95 mm ( 3-7/10 inch )
Material: Nickel chromium alloy steel
Replaceable Carbide Knives
Size: 30 X 12 X 1.5 mm-35° Z=2
Quantity: 2 pieces
Material: tungsten carbide
Cutting Edge: 2
Application
Router bits are suitable for cutting softwood, hardwood, plywood, particle board, chipboard, MDF/HDF, laminate, high pressure laminate (HPL), composite decking, acrylic and other.
Applicable machinery: table mount router, handheld router and other.
Package Listing
1 X double bearing flush trim router bit
1 X wrench
Features
Save cutting costs. The flush trim router bit has 2 pieces reversible carbide inserts ( 30 mm X 12 mm X 1.5 mm-35° Z=2), fixed by the screws. Each blade has 2 cutting edges. You only need to replace the blade on the router bit without replacing the entire drill bit. The ability to replace carbide inserts can extend the life of your milling cutter and save costs in the long run.
High quality. The long service life and excellent performance of the flush trim router bits are due to the fact that the bit body is made of high-quality nickel-chromium alloy steel and the carbide insert blade is made of high-quality tungsten carbide.
Cutting smooth. The sharp blade allows for clean cuts and a smooth finish, minimizing tears, chips and burrs. Spiral groove design results in better chip evacuation.
Precision guide double bearings make this drill cut smoothly and accurately. There are bottom bearing and top bearing, the template is attached to the workpiece, and guide bearings slide along its edges to form an exact replica of the template. Ideal for template trimming, edge trimming, template wiring, and pattern forming tasks.
Each carbide blade serves two purposes. Once the insert cutter shows signs of wear, you can rotate the carbide insert to get a fresh cutting edge.
Note
Please install the carbide blade vertically to ensure that the blade is in the same straight line to avoid runout or kickback problems with the router bit.
Please make sure the set screws are tightened before use.
When cutting hardwood, reduce cutting force and proceed slowly.
![yeptooling double bearing flush trim router bit milling cutter for woodworking trimming, 1/2 inch shank diameter, 3/4 inch cutting diameter, 1-1/6 inch cutting length, 3-7/10 inch overall length](http://www.yeptooling.com/cdn/shop/files/d12.7D19L30-2.jpg?v=1697535020&width=1445)
![yeptooling 1/2 inch shank flush trim router bit with reversible carbide insert blades 30x12x1.5mm 2 edges,up ball bearing and lower ball bearing for wood trimming template pattern router bit milling cutter](http://www.yeptooling.com/cdn/shop/files/d12.7D19L30-1.jpg?v=1697016457&width=1445)
![yeptooling double bearing flush trim router bit milling cutter for woodworking trimming, 12 mm shank diameter, 19 mm cutting diameter, 30 mm cutting length, 95 mm overall length](http://www.yeptooling.com/cdn/shop/files/d12D19L30-2.jpg?v=1697535020&width=1445)
![yeptooling 1/2 inch 12mm shank diameter double bearing flush trim router bit with 2 pieces carbide inserts 30x12x1.5mm-35°Z=2, 4 pieces screws, 1 wrench](http://www.yeptooling.com/cdn/shop/files/d12.7D19L30-3.jpg?v=1697535020&width=1445)
![yeptooling replaceable tungsten carbide insert blade 30x12x1.5mm-35° Z=2 for double bearing flush trim router bit](http://www.yeptooling.com/cdn/shop/files/30x12x1.5mm-35.jpg?v=1697535014&width=1445)
![yeptooling 12 mm shank flush trim router bit with replaceable carbide inserts 30x12x1.5mm z=2, up ball bearing and lower ball bearing for wood trimming template pattern router bit milling cutter](http://www.yeptooling.com/cdn/shop/files/d12D19L30-1.jpg?v=1697535014&width=1445)
![](http://www.yeptooling.com/cdn/shop/files/Dilivery.jpg?v=1683703240&width=1500)
Shipping Policy
Shipping Time
Economy method: shipping time is about 25 days.
Standard method: shipping time is about 15 days.
Please click the link below to know more details.